Step 7 Remove all cables from the built-in drive module. For details, see 7 Internal Cabling.
Step 8 Lift the built-in drive assembly. See Figure 3-18.
Figure 3-18 Removing the built-in drive assembly
Step 9 Place the removed built-in drive assembly in an ESD bag.
----End
3.11 Installing the Built-in Drive Assembly
Step 1 Wear an ESD wrist strap. For details, see 12 Preventing Electrostatic Discharge.
Step 2 Power off the server. For details, see 3.2 Powering Off the Server.
Step 3 Remove the power cables. For details, see 3.7 Removing Cables from a PSU.
Step 4 Remove the server. For details, see 3.3 Removing the Server and Guide Rails.
Step 5 Remove the chassis cover. For details, see 3.4 Removing the Chassis Cover.
Step 6 Push the plastic structure in the arrow direction on both sides of the chassis, and place the
built-in drive tray downwards. See Figure 3-19.
2288H V5 Server
User Guide
3 Basic Operations
Issue 04 (2018-09-04) Copyright © Huawei Technologies Co., Ltd. 59
To Next Page
Loading...
