Huawei 2288H V5 - Page 19

Figure 2-13 Rear panel components 2
1 I/O module 1 2 I/O module 2
3 I/O module 3 4 Power supply unit (PSU) 2
5 PSU sockets 6 PSU 1
7 Flexible NIC (optional) 8 USB 3.0 ports
9 Serial port 10 Management network port
11 GE electrical ports 12 VGA port
13 10GE optical ports - -
NOTE
I/O module 1, 2, and 3 can be rear drive modules or riser card modules. The preceding figure is for
reference only.
Table 2-4 Ports on the rear panel
Port
Type Quantit
y
Description
10GE
electrical port
10GBASE-T 2 The 2288H V5 has two types of
mainboards. One mainboard provides two
10GE and two GE electrical ports. The
other motherboard provides two 10GE
optical ports and two GE electrical ports.
You can select either of them as required.
NOTE
10GE electrical ports or optical ports are
integrated service network ports on the server
mainboard.
10GE optical
port
10GE SFP+ 2
VGA port DB15 1 The VGA port is connected to a terminal,
such as a monitor or KVM.
GE electrical
port
1000BASE-T 2 Service network port integrated on the
server mainboard.
Serial port RJ45 1 The serial port is used as the system serial
port by default. You can set it as the iBMC
serial port by using the iBMC CLI. This
port is used for debugging.
2288H V5 Server
User Guide
2 Components
Issue 04 (2018-09-04) Copyright © Huawei Technologies Co., Ltd. 10