Rear Drive Backplane Cabling (2)
Figure 7-25 Rear drive backplane cabling (2)
Table 7-25 Rear drive backplane cabling (2)
No.
Description Huawei Part
Number
1 Power cable for connecting the rear drive backplane (J1) to
the mainboard (J127)
04150448-001
2 Signal cable for connecting the front drive backplane (J30)
to the rear drive backplane (J24)
04051053
3 SAS cable for connecting the rear drive backplane (J3) to
port D of the RAID controller card on the mainboard
NOTE
The Y end of this cable (BOM 04051933) has two connectors
HDD A and HDD B, which are connected to the rear backplanes
for I/O modules 1 and 2 respectively. Use the connectors based on
actual situation.
04051933
4 Power cable for connecting the rear drive backplane (J1) to
the mainboard
04150448-001
5 Signal cable for connecting the front drive backplane (J31)
to the rear drive backplane (J24)
04051053
2288H V5 Server
User Guide
7 Internal Cabling
Issue 04 (2018-09-04) Copyright © Huawei Technologies Co., Ltd. 199
To Next Page
Loading...
