Rear Drive Backplane Cabling
Figure 7-55 Rear drive backplane cabling
Table 7-55 Rear drive backplane cabling
No.
Description Huawei
Part
Number
1 Indicator signal cable for connecting the front drive backplane
(J32) to the rear drive backplane (J24)
04051053
2 Power cable for connecting the rear drive backplane (J1) to the
mainboard (J127)
04150448-
001
3 SAS cable for connecting the front drive backplane (J3) to port A
of the RAID controller card
NOTE
The Y end of this cable (BOM 04051934) has two connectors HDD A and
HDD B, which are connected to the rear backplanes for I/O modules 1 and
2 respectively. Use the connectors based on actual situation.
04051934
2288H V5 Server
User Guide
7 Internal Cabling
Issue 04 (2018-09-04) Copyright © Huawei Technologies Co., Ltd. 229
To Next Page
Loading...
