Huawei 2288H V5 - Page 242

Figure 7-59 Internal cabling for the drive backplane of I/O module 3 (server with twelve 3.5-
inch drives (pass-through) 3)
Table 7-59 Internal cabling for the drive backplane of I/O module 3
No.
Description Huawei Part
Number
1 Signal cable for connecting slimline B (J9) of the rear drive
backplane to slimline B (J139) on the mainboard
04051931
2 SAS cable for connecting the rear drive backplane (J2) to
port A of the plug-in PCIe RAID controller card
04051059-002
3 Signal cable for connecting slimline A (J8) of the rear drive
backplane to slimline A (J140) on the mainboard
04051931
4 Power cable for connecting the rear drive backplane (J22)
to the mainboard (J172)
04150448-001
5 Indicator signal cable for connecting the rear drive
backplane (J23) to the mainboard (J164)
04051122
NOTE
The plug-in PCIe RAID controller card is installed on I/O module 2.
2288H V5 Server
User Guide
7 Internal Cabling
Issue 04 (2018-09-04) Copyright © Huawei Technologies Co., Ltd. 233