Server
Parameter
Operation
Interval for
updating the
SSH server
key pair
Run the ssh server rekey-interval rekey-interval command.
By default, the interval is 0, indicating that the key pair is never updated.
----End
5.4.7 Checking the Configuration
After configuring users to log in using STelnet, you can view the SSH server configuration.
Prerequisites
Configurations for STelnet login are complete.
Procedure
l Run the display ssh user-information username command on the SSH server to check
information about SSH users.
l Run the display ssh server status command on the SSH server to check its configurations.
l Run the display ssh server session command on the SSH server to check sessions for SSH
users.
----End
Example
Run the display ssh user-information username command to view information about a
specified SSH user.
<Huawei> display ssh user-information client001
Sftp-directory : -
Service-type : sftp
-------------------------------------------------------------------------------
Username Auth-type User-public-key-name
-------------------------------------------------------------------------------
guest password null
rsa rsa RsaKey001
password password null
-------------------------------------------------------------------------------
If no SSH user is specified, information about all SSH users logged in to an SSH server will be
displayed.
Run the display ssh server status command to view configurations of an SSH server.
<Huawei> display ssh server status
SSH version :1.99
SSH connection timeout :60 seconds
SSH server key generating interval :0 hours
SSH Authentication retries :3 times
SFTP Server :Enable
Stelnet server :Enable
Huawei AR1200 Series Enterprise Routers
Configuration Guide - Basic Configuration 5 Configuring User Login
Issue 04 (2012-05-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
92
To Next Page
Loading...
