EasyManua.ls Logo

Huawei AR1200 Series - Checking the Configuration; Configuration Examples; Example for Configuring System Startup

Huawei AR1200 Series
232 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
7.3.4 Checking the Configuration
After specifying a configuration file for system startup, you can check the content of the
configuration file and information about the files to be used at the next startup on the router.
Prerequisites
A configuration file has been specified for system startup.
Procedure
l Run the display current-configuration [ configuration [ configuration-type
[ configuration-instance ] ] | controller | interface [ interface-type [ interface-number ] ] ]
[ feature feature-name [ filter filter-expression ] | filter filter-expression ] command to
check current configurations.
l Run the display saved-configuration [ last | time ] command to check the contents of the
configuration file to be loaded at next startup.
l Run the display startup command to check information about the files to be used at next
startup.
----End
Example
Run the display startup command to check information about the files to be used at next startup.
<Huawei> display startup
MainBoard:
Startup system software: usb0:/ar0210_30735_1220.cc
Next startup system software: usb0:/ar0210_30735_1220.cc
Backup system software for next startup: null
Startup saved-configuration file: flash:/arcfg.zip
Next startup saved-configuration file: flash:/arcfg.zip
Startup license file: null
Next startup license file: null
Startup patch package: null
Next startup patch package: null
Startup voice-files: null
Next startup voice-files: null
7.4 Configuration Examples
The example in this section shows how to configure system startup. The example explains
networking requirements, and provides a configuration roadmap and configuration notes.
7.4.1 Example for Configuring System Startup
This example shows how to configure system startup. In the example, a configuration file is
saved and the system software and configuration file to be loaded at the next startup are specified
so that the router can start in a required manner.
Networking Requirements
After the router is configured, new configurations take effect at next system startup.
Huawei AR1200 Series Enterprise Routers
Configuration Guide - Basic Configuration 7 Configuring System Startup
Issue 04 (2012-05-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
140

Table of Contents

Other manuals for Huawei AR1200 Series

Related product manuals