Huawei AR1200 Series - Accessing the System by Using FTP

Step 4 Run:
quit
The system view is displayed.
Step 5 Run:
ftp acl acl-number
The basic FTP ACL is configured.
----End
6.3.7 Accessing the System by Using FTP
After the FTP server is configured, you can use FTP to access the router from a PC and manage
the files on the router.
Context
You can use either the Windows command line prompt or third-party software to log in to the
router. The example here uses the Windows command line prompt as an example.
Do as follows on the PC:
Procedure
Step 1 Open the Windows CLI.
Step 2 Run the ftp ip-address command to log in to the router using FTP.
Enter a username and password at the prompt, and press Enter. When the Windows command
line prompt are displayed in the FTP client view, such as ftp>, you have entered the working
directory of the FTP server.
Figure 6-1 Using FTP to log in to the device
----End
Huawei AR1200 Series Enterprise Routers
Configuration Guide - Basic Configuration 6 Managing the File System
Issue 04 (2012-05-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
114