Huawei AR1200 Series - Command Line Views

To Next Page

To Previous Page

Figure 2-2 Searching commands based on a specific level

2.1.3 Command Line Views

The command line interface has different command views. Each command is registered to run

in one or more command views. You can run a command only after you enter an appropriate

command view.

The following example uses the user, system, and aaa views:

# Establish a connection to the router. If the router is using the default configurations, the

<Huawei> prompt indicates that you have entered the user view.

# Run the system-view command to enter the system view.

<Huawei> system-view

[Huawei]

# Run the aaa command in the system view to enter the AAA view.

[Huawei] aaa

[Huawei-aaa]

Huawei AR1200 Series Enterprise Routers

Configuration Guide - Basic Configuration 2 CLI Overview

Issue 04 (2012-05-15) Huawei Proprietary and Confidential

Other manuals for Huawei AR1200 Series