Huawei AR1200 Series - 4 Configuring User Interfaces

To Next Page

To Previous Page

4 Configuring User Interfaces

About This Chapter

When a user logs in to the router by using the console port, Telnet, or SSH, the system manages

the session between the user and the router on the corresponding user interface.

4.1 User Interface Overview

The system supports console and VTY user interfaces.

4.2 Configuring the Console User Interface

If you log in to the device through a console port to perform local maintenance, you can configure

attributes for the console user interface as needed.

4.3 Configuring the VTY User Interface

If you need to log in to the router using Telnet or SSH to perform local or remote maintenance,

you can configure the VTY user interface as needed.

4.4 Configuring a TTY User Interface

The True Type Terminal (TTY) user interface view is a command line view and is used to

configure and manage physical interfaces working in asynchronous and interactive mode.

4.5 Configuration Examples

This section provides examples for configuring console and VTY user interfaces. These

configuration examples explain networking requirements, and provides configuration roadmaps

and configuration notes.

Huawei AR1200 Series Enterprise Routers

Configuration Guide - Basic Configuration 4 Configuring User Interfaces

Issue 04 (2012-05-15) Huawei Proprietary and Confidential

Other manuals for Huawei AR1200 Series