1.3.1 Establishing the Configuration Task
Before logging in to the router through a mini USB port, familiarize yourself with the applicable
environment, complete the pre-configuration tasks, and obtain the data required for the
configuration. This will help you complete the configuration task quickly and accurately.
Applicable Environment
When the router is powered off for the first time, log in to the router through a mini USB port
to configure and manage the router.
Pre-Configuration Tasks
Before logging in to the router through a mini USB port, complete the following tasks:
l Installing the terminal emulation program such as the HyperTerminal in the Windows XP
operating system on the PC
l Preparing mini USB cables
Data Preparation
To log in to the router through a mini USB port, you need the following data.
No.
Data
1 Terminal communication parameters including the baud rate, data bit, parity bit, stop
bit, and flow control mode
1.3.2 Establishing a Physical Connection
This section describes how to use a mini USB cable to connect the router mini USB port to a
PC USB port.
Procedure
Step 1 Power on all the devices and perform self-check.
Step 2 Use a mini USB cable to connect a PC USB port to the router mini USB port.
----End
1.3.3 Installing the router Driver
This section describes how to install the router driver on a PC so that the PC can discover and
identify the AR1200.
Context
The router driver supports only the Windows XP, Windows Vista, and Windows 7 operating
systems.
Huawei AR1200 Series Enterprise Routers
Configuration Guide - Basic Configuration 1 Logging In to the System for the First Time
Issue 04 (2012-05-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
6
To Next Page
Loading...
