Huawei AR1200 Series - Configuration Examples

The system software to be used at the next startup is specified for the MPU.
Step 2 (Optional) If the upgraded system software needs a corresponding patch file, perform the
following operations:
l Run:
startup patch file-name
A patch file to be used at the next startup is specified for the MPU.
Step 3 (Optional) Run:
startup saved-configuration configuration-file
The configuration file to be used at the next startup is specified for the MPUs.
Step 4 (Optional) Run:
startup license file-name
The license file to be used at the next startup is specified for the MPU.
----End
9.3.5 Configuring a Backup Startup File
After a backup startup software package is configured, the system can restart properly if a fault
occurs.
Context
If the storage device where the startup software package is stored is damaged, you can use the
backup software package to make the system start.
NOTE
l The file name extension of the system software package must be .cc and the package must be stored
in the root directory.
l The backup startup software package can be identical with or different than the current startup software
package. Either can be used to start the system.
Procedure
Step 1 Run:startup system-software filename backup. A backup startup software package is
specified.
----End
9.3.6 (Optional) Upgrading the BootROM of the LPU
After the system software is upgraded, you need to manually upgrade the BootROM of the 2FE .
Context
NOTE
Run the display device command to check whether the device is configured with a registered 2FE .
Huawei AR1200 Series Enterprise Routers
Configuration Guide - Basic Configuration 9 Upgrade and Maintenance
Issue 04 (2012-05-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
203