Huawei AR1200 Series - Common Operations after Login; Establishing the Configuration Task; Switching User Levels

To Next Page

To Previous Page

Run the display ssh server session command. The command output shows that the session

information between SSH server and client.

<Huawei> display ssh server session

--------------------------------------------------------------------

Conn Ver Encry State Auth-type Username

--------------------------------------------------------------------

VTY 0 1.5 BLOWFISH run password john

--------------------------------------------------------------------

5.5 Common Operations After Login

After logging in to the router, you can perform user priority switching, terminal window locking,

and other operations as needed.

5.5.1 Establishing the Configuration Task

Before performing operations after login, familiarize yourself with the applicable environment,

complete the pre-configuration tasks, and obtain any data required for the configuration. This

will help you complete the configuration task quickly and correctly.

Applicable Environment

Configure user level switching and enable messaging between user interfaces to ensure that

operators can manage routers safely.

Pre-configuration Tasks

Before performing operations after login, complete the following tasks:

l Connecting the terminal to the router

Data Preparations

Before performing operations after login, you need the following data:

No.

Data

1 Password used for switching user levels

2 Type and number of the user interface

3 Contents of the message to be sent

5.5.2 Switching User Levels

A user who wants to upgrade from a lower to a higher level after logging in to the router must

have a password already configured.

Huawei AR1200 Series Enterprise Routers

Configuration Guide - Basic Configuration 5 Configuring User Login

Issue 04 (2012-05-15) Huawei Proprietary and Confidential

Other manuals for Huawei AR1200 Series