Huawei AR1200 Series - Configuring User Login

The system view is displayed.
2. Run:
user-interface vty first-ui-number [ last-ui-number ]
The VTY user interface view is displayed.
3. Run:
authentication-mode password
The authentication mode is set to password authentication.
4. Run:
set authentication password { cipher | simple } password
A password for password authentication is set.
l Configuring non-authentication
1. Run:
system-view
The system view is displayed.
2. Run:
user-interface vty first-ui-number [ last-ui-number ]
The VTY user interface view is displayed.
3. Run:
authentication-mode none
The authentication mode is set to non-authentication.
----End
4.3.7 Checking the Configuration
After configuring a VTY user interface, you can view information about user interfaces, the
maximum number of VTY user interfaces, and physical attributes and configurations of user
interfaces.
Prerequisites
The configurations of the VTY user interface are complete.
Procedure
l Run the display users [ all ] command to check information about user interfaces.
l Run the display user-interface maximum-vty command to check the maximum number
of VTY user interfaces.
l Run the display user-interface [ [ ui-type ] ui-number1 | ui-number ] [ summary ]
command to check the physical attributes and configurations of user interfaces.
l Run the display local-user command to check the local user list.
l Run the display vty mode command to check the VTY mode.
----End
Example
Run the display users command to view information about current user interfaces.
Huawei AR1200 Series Enterprise Routers
Configuration Guide - Basic Configuration 4 Configuring User Interfaces
Issue 04 (2012-05-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
57