Huawei AR1200 Series - Optional) Configuring the Console User Interface

To Next Page

To Previous Page

Figure 5-3 Communication parameter settings

Step 4 Press Enter. A command-line prompt such as <Huawei> appears, and the user view is displayed

for you to configure the router.

NOTE

When you connect to the console port of a AR1200 that does not have a startup configuration file, the

system displays "Auto-Config is working. Before configuring the device, stop Auto-Config. If you perform

configurations when Auto-Config is running, the DHCP, routing, DNS, and VTY configurations will be

lost. Do you want to stop Auto-Config? [y/n]:"

l To continue Auto-Config, enter n and press Enter.

l To stop Auto-Config, choose y and press Enter.

CAUTION

If you choose n but still perform configurations through the console port, the DHCP, routing, DNS,

and VTY configurations that you have performed will be lost.

----End

5.2.3 (Optional) Configuring the Console User Interface

If you log in to the device through a console port to perform local maintenance, you can configure

attributes for the console user interface as needed.

Huawei AR1200 Series Enterprise Routers

Configuration Guide - Basic Configuration 5 Configuring User Login

Issue 04 (2012-05-15) Huawei Proprietary and Confidential

Other manuals for Huawei AR1200 Series