Huawei AR1200 Series - Configuring the Basic System Environment

3.1 Configuring the Basic System Environment
This section describes how to configure the basic system environment.
3.1.1 Establishing the Configuration Task
Before configuring the basic system environment, familiarize yourself with the applicable
environment, complete the pre-configuration tasks, and obtain any data required for the
configuration. This will help you complete the configuration task quickly and correctly.
Applicable Environment
Before configuring services, you need to configure the basic system environment (such as time
and device name) to meet the environment requirement.
Pre-configuration Tasks
Before configuring the basic system environment, complete the following task:
l Powering on the router
Data Preparation
To configure the basic system environment, you need the following data.
No.
Data
1 System time
2 Host name
3 Login information
4 Command level
3.1.2 Configuring the Equipment Name
If multiple devices on a network need to be managed, set equipment names to identify each
device.
Context
New equipment names take effect immediately.
Procedure
Step 1 Run:
system-view
Huawei AR1200 Series Enterprise Routers
Configuration Guide - Basic Configuration 3 Basic Configuration
Issue 04 (2012-05-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
31