Huawei AR1200 Series - Logging in to the Router

To Next Page

To Previous Page

Figure 1-7 Finishing decompressing the driver

Step 5 Find the DISK1 folder in the specified driver directory, and double-click setup.exe.

Step 6 Click Next. Select I accept the terms in the license agreement and click Next to install the

driver.

Step 7 Click Finish to finish installing the driver.

Step 8 Right-click My Computer, and choose Manage -> Device Manager -> Ports(COM&LPT).

The TUSB3410 Device (COM3) is displayed, indicating an router.

NOTE

If there is no TUSB3410 device (COM3) in the device manager, reinstall the driver or use another mini

USB cable to connect the AR1200 to the PC.

----End

1.3.4 Logging In to the router

You can log in to the router from a PC through a mini USB port to configure and manage the

router that is powered on for the first time.

Procedure

Step 1 Run the terminal emulation program such as the HyperTerminal of Windows XP on the PC and

establish a connection, as shown in Figure 1-8.

Huawei AR1200 Series Enterprise Routers

Configuration Guide - Basic Configuration 1 Logging In to the System for the First Time

Issue 04 (2012-05-15) Huawei Proprietary and Confidential

Other manuals for Huawei AR1200 Series