Huawei AR1200 Series - Checking the Configuration; Monitoring CPU and Memory Usage; Establishing the Configuration Task

Context
Only one patch file can be run in the system during patch installation. Therefore, delete the
running patch file from the patch area before loading and running a new patch file.
Procedure
Step 1 Run:
patch delete all
All patches in the system are deleted.
----End
Follow-up Procedure
After patch files have been deleted, run the following command to verify the configuration.
l Run the display patch-information command to check the patch status.
<Huawei> display patch-information
Info: No patch in the system
9.4.5 Checking the Configuration
After patch installation is complete, you can view patch information, such as the patch status.
Prerequisites
The configurations for patch installation are complete.
Procedure
l Run the display patch-information command to check information about all patches.
----End
Example
After a patch has been installed, run the display patch-information command to view the patch
status on each board.
<Huawei> display patch-information
Patch version : ARV200R001C00SPH100
Patch packet name: flash:/patch_lic2.pat
9.5 Monitoring CPU and Memory Usage
Configure CPU and memory usage thresholds to monitor system performance.
9.5.1 Establishing the Configuration Task
Before setting CPU and memory usage thresholds, familiarize yourself with the applicable
environment, complete the pre-configuration tasks, and obtain any data required for the
configuration. This will help you complete the configuration task quickly and correctly.
Huawei AR1200 Series Enterprise Routers
Configuration Guide - Basic Configuration 9 Upgrade and Maintenance
Issue 04 (2012-05-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
208