EasyManua.ls Logo

Huawei AR1200 Series - Configuration Examples; Example for Configuring Console User Interface

Huawei AR1200 Series
232 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
+ : Current UI is active.
F : Current UI is active and work in async mode.
Idx : Absolute index of UIs.
Type : Type and relative index of UIs.
Privi: The privilege of UIs.
ActualPrivi: The actual privilege of user-interface.
Auth : The authentication mode of UIs.
A: Authenticate use AAA.
N: Current UI need not authentication.
P: Authenticate use current UI's password.
Int : The physical location of UIs.
4.5 Configuration Examples
This section provides examples for configuring console and VTY user interfaces. These
configuration examples explain networking requirements, and provides configuration roadmaps
and configuration notes.
4.5.1 Example for Configuring Console User Interface
In this example, a console user interface is configured to allow a user in password authentication
mode to log in to the router. The physical attributes, terminal attributes, user priority, user
authentication mode, and password are set for the interface.
Networking Requirements
A user uses the console user interface to log in to the router to initialize router configurations or
perform local router maintenance. You can set console user interface attributes as needed (for
example, security considerations) to allow user logins.
The password authentication mode has been set in the console user interface view (the password
is huawei).
If there is no user activity and a connection is idle for more than 30 minutes after login, the
connection is torn down.
Configuration Roadmap
The configuration roadmap is as follows:
1. Enter the interface view and set physical attributes of the console user interface.
2. Set terminal attributes of the console user interface.
3. Set the user priority of the console user interface.
4. Set the user authentication mode and password of the console user interface.
Data Preparation
To complete the configuration, you need the following data:
l Transmission rate of the console user interface: 4800 bit/s
l Flow control mode of the console user interface: None
l Parity of the console user interface: even
l Stop bit of the console user interface: 2
Huawei AR1200 Series Enterprise Routers
Configuration Guide - Basic Configuration 4 Configuring User Interfaces
Issue 04 (2012-05-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
64

Table of Contents

Other manuals for Huawei AR1200 Series

Related product manuals