5 Configuring the E9000
This section describes the procedures for configuring the E9000 on a local PC for the first
time. The initial configuration is performed on the management modules, compute nodes, and
switch modules.
5.1 Overview
5.2 Default Information
5.3 Configuring Management Modules
5.4 Configuring Compute Nodes
5.5 Configuring Switch Modules
5.1 Overview
After installing the E9000, configure it to work properly. Figure 5-1 shows the initial
configuration process for the E9000.
Figure 5-1 Configuration process
E9000 Server
User Guide
5 Configuring the E9000
Issue 25 (2019-11-30) Copyright © Huawei Technologies Co., Ltd. 91
To Next Page
Loading...
