Huawei E9000 - Installing a Full-Width Compute Node

Figure 3-33 Installing the half-width compute node
3. Completely open the ejector lever on the half-width compute node. See (2) in Figure
3-33.
4. Horizontally insert the half-width compute node into the chassis. See (3) in Figure 3-33.
5. Close the ejector lever on the half-width compute node. See (4) in Figure 3-33.
----End
3.10 Installing a Full-Width Compute Node
During operations, wear protective gloves to prevent personal injury.
E9000 Server
User Guide
3 Installing the E9000
Issue 25 (2019-11-30) Copyright © Huawei Technologies Co., Ltd. 70