Huawei E9000 User Manual

5.2 Default Information
For security purposes, change the initial password upon the first login, and then change your password
periodically.
Default Information of the MM910s
Table 5-1 Default IP addresses of the MM910s
Item
Default Value
Static IP address of the
standby MM910
l MM1: 192.168.2.1
l MM2: 192.168.2.2
l Subnet mask: 255.255.255.0
Static IP address of the
active MM910
Floating IP address of the
MM910
l Floating IP address: 192.168.2.3
l Subnet mask: 255.255.255.0
Table 5-2 Default user information of the MM910s
User
Name
User Description Default
Passwo
rd
User
Type
User
Status
Login
Method
root A user who logs in over a
network port or serial port by
using the web, SSH, or
SNMP.
Huawei
12#$
Administra
tor
Enabled Remote
or local
login
– A user who logs in to the U-
Boot over a serial port. No
user name is used.
Huawei
12#$
Administra
tor
Enabled Local
login
sshd A user of the Secure Shell
Daemon (SSHD).
The SSH protocol allows a
user to remotely log in to the
host execution program and
securely manage the host.
– System
account
Locked Login
prohibite
d
rpc A user of the rpc service.
E9000 Server
User Guide
5 Configuring the E9000
Issue 25 (2019-11-30) Copyright © Huawei Technologies Co., Ltd. 92

Huawei E9000 Specifications

General

Form Factor	12U chassis
Blade Slots	16 half-width slots or 8 full-width slots
Switch Modules	GE, 10GE, and IB switches
Management Modules	Two hot-swappable management modules for redundancy
Power Supply	Supports up to 6 hot-swappable power supply units (PSUs)
Cooling	Redundant hot-swappable fan modules
Processor Options	Intel Xeon E5-2600 v3/v4 series processors (depending on blade type)
Memory Capacity	Up to 1.5 TB per blade
Storage Options	SAS/SATA/SSD options in blades
Networking	10GE/40GE networking options
Management	Huawei iBMC (Intelligent Baseboard Management Controller)
Operating System Support	Red Hat Enterprise Linux, SUSE Linux Enterprise Server, Windows Server, VMware ESXi