Huawei E9000 - Installing the E9000; Installation Overview

3 Installing the E9000
This section describes how to remove and install the E9000 chassis and its components and
cables.
3.1 Overview
3.2 Unpacking the Chassis Packing Case
3.3 Removing Components
3.4 Installing the Chassis
3.5 Installing Fan Modules
3.6 Installing PSUs
3.7 Installing Management Modules
3.8 Installing Switch Modules or Pass-Through Modules
3.9 Installing a Half-Width Compute Node
3.10 Installing a Full-Width Compute Node
3.11 Installing the PGND Cable and Power Cables
3.12 Installing Signal Cables
3.13 Verifying the Installation
E9000 Server
User Guide
3 Installing the E9000
Issue 25 (2019-11-30) Copyright © Huawei Technologies Co., Ltd. 44