Huawei E9000 - Page 166

Procedure
Step 1 Determine the types and quantities of the components to be added.
Table 8-3 Determining the components to be added
Module Type Model Quantity
CPU - -
DIMM - -
Hard disk - -
Mezzanine card - -
Step 2 Check the compatibility between the added components and live network components. For
details, use the Intelligent Computing Compatibility Checker.
l If yes, go to the next step.
l If no, add the components that are of the same model or with the same BOM number as
the existing components in the compute nodes based on the compatibility checker.
Table 8-4 Determining the components to be added
Module
Type
Existing
Component Model
Expansion
Component Model
Compatible or
Not
CPU - - -
DIMM - - -
Hard disk - - -
Mezzanine
card
- - -
Step 3 Remove the compute nodes for which you want to add components. For details, see 6.2
Replacing a Compute Node and Its Components.
Step 4 Install the components to be added. For details, see "Removing and Installing Components of
the CHxxx" in the CHxxx Compute Node User Guide.
E9000 Server
User Guide
8 Expanding the E9000 Capacity
Issue 25 (2019-11-30) Copyright © Huawei Technologies Co., Ltd. 156