Step 3 Use a box cutter to cut the pressure-sensitive tape on the packing case, and unpack the case.
Exercise caution when using the box cutter. Improper operations may cause personal injury or
equipment damage.
Figure 3-3 Unpacking the case
Step 4 Check whether the chassis and its components are complete.
Table 3-1 Bill of materials
No.
Material Quantity
1 Chassis 1
2 Management module Depending on the contract
3 Switch module Depending on the contract
4 PSU Depending on the contract
5 Fan module Depending on the contract
E9000 Server
User Guide
3 Installing the E9000
Issue 25 (2019-11-30) Copyright © Huawei Technologies Co., Ltd. 47
To Next Page
Loading...
