Workflow
Figure 3-26 Process
Procedure
Step 1 Unpack the packing case.
1. Check whether the packing case and seals are in good condition.
If the packing case is damaged (for example, the packing case is wet or deformed, or the seal or
pressure-sensitive tape is unsealed), fill in the Cargo Problem Feedback Form.
2. Use a box cutter to cut the pressure-sensitive tape of the packing case.
When using a box cutter to unpack a packing case, ensure that the knife edge is of a
proper protrusion to avoid hurting hands or damaging the device in the packing case.
3. Unpack the half-width compute node, as shown in Figure 3-27.
E9000 Server
User Guide
3 Installing the E9000
Issue 25 (2019-11-30) Copyright © Huawei Technologies Co., Ltd. 65
To Next Page
Loading...
