Figure A-16 Preparing an OT terminal
(1) Cable (2) Heat shrink tubing (3) OT terminal
(4) Hydraulic pliers (5) Heat gun
Step 3 The following gure shows how to prepare a cord end terminal.
Figure A-17 Preparing a cord end terminal
(1) Cable
(2) Cord end terminal (3) Crimping tool
----End
FusionDC1000A Prefabricated All-in-One Data
Center
Installation Guide (IT Scenario) A Basic Installation Operations
Issue 01 (2021-04-20) Copyright © Huawei Technologies Co., Ltd. 118
To Next Page
Loading...
