Huawei FusionDC1000A - 7 Removing Transport Protection Materials; Removing Transport Protection Materials for Smart Cooling Products

7 Removing Transport Protection
Materials
7.1 Removing Transport Protection Materials for Smart
Cooling Products
Preparations
● Tools: 13# socket wrench, Phillips screwdriver,
● Materials: none
● Skill requirement: common technician
NO TE
This section describes how to remove the transport protection materials for the NetCol5000-
A025 smart cooling product.
Procedure
Step 1 Remove the compressor fasteners of a smart cooling product.
FusionDC1000A Prefabricated All-in-One Data
Center
Installation Guide (IT Scenario) 7 Removing Transport Protection Materials
Issue 01 (2021-04-20) Copyright © Huawei Technologies Co., Ltd. 60