Huawei FusionDC1000A - Preparing Cable Terminals

To Next Page

To Previous Page

NO TICE

● Labels must be securely attached.

● Labels must be attached in eye-catching positions on cables for ease of

maintenance.

● The labels on both ends of a cable must be the same.

----End

A.2 Preparing Cable Terminals

Preparations

Tools: hydraulic pliers, heat gun, and crimping tool

Materials: heat shrink tubing, DT terminal, OT terminal, and cord end terminal

Skill requirement: common technician

Procedure

Step 1 The following gure shows how to prepare a DT terminal.

Figure A-15 Preparing a DT terminal

(1) Cable

(2) Heat shrink tubing (3) DT terminal

(4) Hydraulic pliers (5) Heat gun

Step 2 The following gure shows how to prepare an OT terminal.

FusionDC1000A Prefabricated All-in-One Data

Center

Installation Guide (IT Scenario) A Basic Installation Operations

Other manuals for Huawei FusionDC1000A