Huawei FusionDC1000A - Removing Transport Fasteners from Cabinets

To Next Page

To Previous Page

NO TICE

If the pre-fab. module may need to be transferred to another site in the future, the

fasteners should be properly stored so that the smart cooling product can be

secured in the case of transfer.

----End

7.2 Removing Transport Fasteners from Cabinets

Preparations

Tool: adjustable wrench

Materials: none

Skill requirement: common technician

Context

To prevent cabinets from sliding during pre-fab. module transportation, transport

fasteners are secured to the top of each cabinet. After the pre-fab. module is

installed, the fasteners need to be removed.

Figure 7-5 Installation positions of transport fasteners on the top of IT cabinets

and smart cooling products

(1) Installation positions of side panels for sealing plates

FusionDC1000A Prefabricated All-in-One Data

Center

Installation Guide (IT Scenario) 7 Removing Transport Protection Materials

Other manuals for Huawei FusionDC1000A