Huawei FusionDC1000A Installation Guide

Table 3-2 Materials recommended for local purchase
Name Model/Function Quantity
(Optional)
Silicone
sealant
Installs awnings. 1 bottle
(Optional)
Glue gun
Applies glue during awning installation. 1 PCS
Hacksaw Cuts PPR pipes. 1 PCS
Water rell
or
condensate
pipe
DN25-PP-R, including the straight section, elbow,
and straight-through connector
Depending
on the actual
pipe route
Pipe thermal
insulation
10 mm thick thermal insulation foam, such as
rubber-plastic foam and glass wool
Depending
on the actual
pipe route
Pipe
fastener
Supports pipes. Depending
on the actual
pipe route
Cable tie Binds and secures cables onsite. 1 package,
200 to 300
PCS
Power cable ● Electronic|Electric Cable, 600 V/1000 V, ZA-YJV,
(4 x 120 + 1 x 70)mm
2
, Black (4+1 Cores:
Yellow, Green, Red, Blue, Black), 322 A, CE
● Connects mains input power cables.
Depending
on site
requirements
Insulation
tape
Insulates cables onsite. 1 roll
Terminal
● Bare crimping terminal, DT, 120 mm
2
, M12,
380 A, tin plating
● Connects mains input power cables.
18 PCS
● Bare crimping terminal, DT, 70 mm
2
, M12,
260 A, tin plating
● Connects mains input power cables.
5 PCS
Ground
cable
terminal
● Bare crimping terminal, DT, 95 mm
2
, M12, tin
plating
● Electronic|Electric Cable, 450 V/750 V, 60227
IEC 02 (RV), 95 mm
2
,Yellow/Green, 258 A,
CCC, CE
Congure 1
PCS for each
ground point.
FusionDC1000A Prefabricated All-in-One Data
Center
Installation Guide (IT Scenario) 3 Installation Preparations
Issue 01 (2021-04-20) Copyright © Huawei Technologies Co., Ltd. 27

Huawei FusionDC1000A Specifications

General

Brand	Huawei
Model	FusionDC1000A
Category	Storage
Language	English