Huawei NE40E - Page 110

NE40E
Hardware Description
1 Hardware Description
Issue 01 (2018-05-03)
96

Lower chassis

The cards of LPUs are numbered from bottom to top and from left to right beginning with 0. If there
is no card on a board, the card number is set to 0.
Port number:

Upper chassis

The ports of LPUs are numbered from left to right and from top to bottom beginning with 0.

Lower chassis

The ports of LPUs are numbered from right to left and from bottom to top beginning with 0.
Technical Specifications
Item
Specification
Dimensions (H x W x D)

(32 U) 1420 mm x 442 mm x 650 mm (55.91 in. x
17.40 in. x 25.59 in.) (Chassis main body)

(32 U) 1420 mm x 442 mm x 770 mm (55.91 in. x
17.40 in. x 30.31 in.) (Dimensions of the chassis
body together with cable trays and front and back
attachments)
Weight (empty)
69.6 kg (153.47 lb) (without filler panels)
Weight (full configuration)
279 kg (615.2 lb)
Cabinet installation standard
Can be installed in a standard 19" 800 mm-deep
cabinet. A Huawei 2.2 m-high N68E cabinet is used by
default.
Typical power consumption
6210 W (fully configured with LPUF-240s)
Typical heat dissipation
20147.9 BTU/hour (fully configured with LPUF-240s)
DC input voltage

input voltage range: –38.4 V to –72 V

input rated voltage: –48 V/ –60 V
AC input voltage

input voltage range: 180 V to 264 V

input rated voltage: 200 V to 240 V
MTBF
21.66 years
MTTR
0.5 hours
Availability
0.999997365
Slot quantity
22