Technical Specifications
Table 1-1414 Interface specifications
1.11.12 10Gbps SFP+ Optical Module
1.11.13 10Gbps SFP+ CWDM Optical Module
1.11.14 10Gbps SFP+ BIDI Optical Module
1.11.15 10Gbps SFP+ DWDM Optical Module
1.11.22 100Gbps CFP2 Optical Module
NOTE
When optical modules with the BOM number 02311LYG are used, 2x40G and
10x10G breakout optical fibers are not supported.
Ethernet_II, Ethernet_SAP and Ethernet_SN/AP
Table 1-1415 Board specifications
40.1 mm x 399.2 mm x 535.6 mm (1.58 in. x 15.72 in. x
21.09 in.)
Typical power
consumption
Long terms: 0 °C to 45 °C (32°F to 113°F) Short terms:
-5 °C to 55 °C (23°F to 131°F)
1.10.20.6 2-Port 100GBase LAN-CFP Integrated Line Processing Unit
B(LPUI-240-B)
Overview
Table 1-1416 Board attributes
To Next Page
Loading...
Need help?
General
