This section describes breakout boxes and maintenance of the breakout fibers and boxes.
1.14 Conversion Box
1.1 About This Document
Purpose
This document describes hardware features of the NE40E, which helps intended readers
obtain detailed information about each chassis, board, and cable, and rapidly locate specific
information through lists of components.
The pictures in this document are for your reference only, the hardware components please make the
object as the standard.
Related Version
The following table lists the product version related to this document.
Intended Audience
This document is intended for:
Network planning engineers
Hardware installation engineers
Commissioning engineers
On-site maintenance engineers
System maintenance engineers
Security Declaration
Encryption algorithm declaration
The encryption algorithms DES/3DES/SKIPJACK/RC2/RSA (RSA-1024 or
lower)/MD2/MD4/MD5 (in digital signature scenarios and password encryption)/SHA1
(in digital signature scenarios) have a low security, which may bring security risks. If
protocols allowed, using more secure encryption algorithms, such as AES/RSA
(RSA-2048 or higher)/SHA2/HMAC-SHA2 is recommended.
Password configuration declaration
− Do not set both the start and end characters of a password to "%^%#". This causes
the password to be displayed directly in the configuration file.
− To further improve device security, periodically change the password.
To Next Page
Loading...
