Huawei NE40E - Eps200-4850 B

NE40E
Hardware Description
1 Hardware Description
Issue 01 (2018-05-03)
149
Item
Specification
Rated AC input voltage
200 V AC to 240 V AC
AC input voltage range
180 V AC to 264 V AC
Maximum AC input current
16 A
Number of DC output channels
4
DC output voltage
53.5 VDC
Maximum DC output current
55 A/module
Typical power consumption
138 W/module
Typical heat dissipation
447.7 BTU/hour
The AC power system supports 200-240 V AC power. It supports 110 V dual-live-wire inputs but not
110 V AC single-phase inputs. If 110 V dual-live-wire inputs are used, the voltage must range from 180
V to 264 V.
1.8.5.4 EPS200-4850B
AC power input is converted into regulated DC power by an AC/DC converter.
Overview
Table 1-69 Power attributes
Attribute
Description
Description
Embedded Power, EPS200, 220Vac Single-Phase, 200A,
Back Cabling, Width 19inch, Height 2U
BOM
02400739
Model
CR5B0PWRBX62
Table 1-70 Mapping products and versions
Product
Earliest Software Version
NE40E-X8
V800R007C00
NE40E-X16
V800R007C00