Ethernet_II, Ethernet_SAP and Ethernet_SN/AP
Table 1-1669 Board specifications
40.1 mm x 399.2 mm x 535.6 mm (1.58 in. x 15.72 in. x
21.09 in.)
Typical power
consumption
Long terms: 0 °C to 45 °C (32°F to 113°F) Short terms:
-5 °C to 55 °C (23°F to 131°F)
1.11 Optical Module
This chapter presents the optical module.
1.11.1 Instructions on How to Use an Optical Module
This section describes instructions on how to use an optical module.
Only optical modules matching Huawei products can be used. These optical modules are strictly tested
by Huawei. If non-matching optical modules are used, device requirements may fail to be met, and
services may fail to run properly. To replace optical modules, see Parts Replacement-Replacing an
Optical Module.
ESD-preventive Measures
Before touching any optical module, wear an ESD wrist strap or ESD gloves. Take full
ESD-preventive measures when installing optical apparatus such as optical modules indoors
or outdoors.
Methods of wearing ESD gloves
Methods of wearing ESD wrist strap
To Next Page
Loading...
