Huawei NE40E - Page 882

NE40E
Hardware Description
1 Hardware Description
Issue 01 (2018-05-03)
868
Name
Description
interface indicator is blinking, breakout channel 0 on this interface is
receiving and transmitting data); if breakout indicator 1 is on,
interface indicators are showing the running status of breakout
channel 1. If the board has breakout interfaces, each breakout
indicator for channels 0 to 9 turns on for 5s in sequence to indicate
the status of the corresponding channel. To rapidly identify the
running status of a specific breakout channel, press the Breakout
button to switch to your desired indicator. For example, if you want
to check the running status of breakout channel 1 on each interface,
press the Breakout button to have breakout indicator 1 turns on.
Table 1-1666 Service interfaces
Interface
Name
Interfac
e Type
Connec
tor
Type
Description
Cable
0 to 7
100GE
CFP2
Interface for
inputting and
outputting
100GE optical
signals
Optical fiber
Functional Specifications
Table 1-1667 Functions and features
Functions and
Features
Remarks
Line-Rate
capability
Supports 1T line-rate forwarding. It supports eight 100G interfaces
for line-rate forwarding.
Reliability and
availability
Hot swappable.
Technical Specifications
Table 1-1668 Interface specifications
Attribute
Description
Optical type
supported
1.11.22 100Gbps CFP2 Optical Module
NOTE
When optical modules with the BOM number 02311LYG are used, 2x40G
breakout optical fibers are not supported.