If the indicator is steady on, the board can be removed.
If the indicator is steady on, the link is Up. If this indicator blinks,
data is being transmitted or received. If the indicator is off, the link is
Down.
If the indicator blinks once every 2s (0.5 Hz), the system is running
properly. If the indicator blinks twice every second (2 Hz), the board
is starting and has not completed registration.
Table 1-1412 Service interfaces
Interface for
inputting and
outputting 10G
LAN/WAN
optical signals
Interface for
inputting and
outputting
100GE optical
signals
Functional Specifications
Table 1-1413 Functions and features
Supports 240G line-rate forwarding. It provides one 100G line-rate
forwarding, and twelve 10GE interfaces.
Reliability and
availability
The 10G interfaces working in WAN mode can function only as
master interfaces. The interface cannot go Up if its FEC does not
match its peer's.
To Next Page
Loading...
