Huawei NE40E - Page 269

NE40E
Hardware Description
1 Hardware Description
Issue 01 (2018-05-03)
255
Name
Description
LINK/ACT
MGMT-ETH
LINK (green)
If this indicator is steady on, the link is Up.
If this indicator is off, the link is Down.
MGMT-ETH ACT
(yellow)
If this indicator is blinking, data is being transmitted and received.
If this indicator is off, no data is being transmitted or received.
Table 1-206 Management interfaces
Interface
Name
Interfac
e Type
Connec
tor
Type
Description
Cable
USB
USB 2.0
USB
Type A
The USB
interface
functions are
uN/Available
and reserved.
-
CF SLOT
CF card
TYPE II
standard
(compati
ble with
TYPE I
standard
)
It is used to
hold a CF card
as a mass
storage device.
-
CTL-ETH-
SFP0,
CTL-ETH-
SFP1
GE
SFP
Reserved
cascading
interface.
-
MGMT-E
TH
Ethernet
interface
(10M/100
M/1000
M
Base-TX
autonegot
iation)
RJ45
It connects to
an NMS and
can work in
half-duplex or
full-duplex
mode.
Super category 5 shielded twisted
pair
Console
RS-232
serial
interface
RJ45
It connects to
the console for
on-site system
configuration.
Baud rate: 9600
bit/s (default
value), which is
configurable.
8-core shielded cable
AUX
RS-232
serial
RJ45
It connects to
the modem for
8-core shielded cable