Appearance
Panel
Table 1-320 Buttons
Board removal button. To remove a board, hold down the OFL
button for about 6s until the OFL indicator turns on, and then remove
the board.
Table 1-321 Indicators
If the indicator is steady on, the board can be removed.
If the indicator blinks once every 2s (0.5 Hz), the system is running
properly. If the indicator blinks twice every second (2 Hz), the board
is starting and has not completed registration.
Functional Specifications
Table 1-322 Functions and features
Supports 50G line-rate processing.
The board provides a maximum of four half-width and half-high slots
and each slot can hold one FPIC card.
Reliability and
availability
To Next Page
Loading...
