Functional Specifications
Table 1-994 Functions and features
Provides one 100GE interface for line-rate transmitting and
receiving.
Occupies one half-width flexible card slot
Reliability and
availability
The interface cannot go Up if its FEC does not match its peer's.
Technical Specifications
Table 1-995 Interface specifications
1.11.22 100Gbps CFP2 Optical Module
NOTE
When optical modules with the BOM number 02311LYG are used, 2x40G and
10x10G breakout optical fibers are not supported.
Ethernet_II, Ethernet_SAP and Ethernet_SN/AP
Table 1-996 Board specifications
37.2 mm x 178.7 mm x 193.3 mm (1.46 in. x 7.04 in. x 7.61
in.)
To Next Page
Loading...
