If the indicator blinks once every 2s (0.5 Hz), the system is running
properly. If the indicator blinks twice every second (2 Hz), the board
is starting and has not completed registration.
If the indicator is steady on, the link is Up. If this indicator blinks,
data is being transmitted or received. If the indicator is off, the link is
Down.
Table 1-1035 Service interfaces
Interface for
inputting and
outputting 10G
POS optical
signals
Functional Specifications
Table 1-1036 Functions and features
Provides two 10GE POS interfaces for line-rate transmitting and
receiving.
The board occupies one half-width flexible card slot
Reliability and
availability
Technical Specifications
Table 1-1037 Interface specifications
1.11.17 10Gbps XFP Optical Module
1.11.18 10Gbps XFP CWDM Optical Module
To Next Page
Loading...
