Panel
Table 1-1069 Indicators
If the indicator blinks once every 2s (0.5 Hz), the system is running
properly. If the indicator blinks twice every second (2 Hz), the board
is starting and has not completed registration.
If the indicator is steady on, the link is Up. If this indicator blinks,
data is being transmitted or received. If the indicator is off, the link is
Down.
Table 1-1070 Service interfaces
Interface for
inputting and
outputting GE
optical signals
Optical fiber and twisted pair
Interface for
inputting and
outputting GE
optical signals
Optical fiber and twisted pair
Functional Specifications
Table 1-1071 Functions and features
Provides twenty-four FE/GE interfaces for line-rate transmitting and
receiving.
Occupies one half-width flexible card slot.
Reliability and
availability
Supports GE optical interfaces but not 100M optical interfaces if a
GE optical module is used. Does not support synchronous Ethernet.
Does not support the LPUF-51 and LPUF-51-B.
To Next Page
Loading...
