Huawei NE40E - Page 764

NE40E
Hardware Description
1 Hardware Description
Issue 01 (2018-05-03)
750
Functional Specifications
Table 1-1345 Functions and features
Functions and
Features
Remarks
Line-Rate
capability
Provides twelve 10GE OTN interfaces for line-rate transmitting and
receiving.
Slot information
The board occupies one half-width flexible card slot.
Reliability and
availability
Hot swappable.
Restrictions and
remarks
Each LPUF-120 supports only one such card, and each LPUF-240
supports two such cards. The mix use of enhanced-i-4 and
enhanced-i-7 for interfaces on the same card is not supported.
Technical Specifications
Table 1-1346 Interface specifications
Attribute
Description
Optical type
supported
1.11.12 10Gbps SFP+ Optical Module
1.11.13 10Gbps SFP+ CWDM Optical Module
1.11.14 10Gbps SFP+ BIDI Optical Module
1.11.16 10Gbps SFP+ OTN Optical Module
1.11.15 10Gbps SFP+ DWDM Optical Module
NOTE
When the OTN rate is used, 10 Gbps SFP+ DWDM optical modules and 10
Gbps SFP+ OTN optical modules are supported.
When the LAN rate is used, 10 Gbps SFP+ BIDI optical modules, 10 Gbps
SFP+ CWDM optical modules, 10 Gbps SFP+ optical modules, and 10 Gbps
SFP+ DWDM optical modules are supported.
Working mode
Full-duplex
Compliant
standard
ITU-T G.709, ITU-T G.798, ITU-T G.806, ITU-T G.975, ITU-T
G.Sup43
Frame format
10G base-R(GFP-F)<->OPU2<->ODU2<->OTU2, 10G
base-R(GFP-F)<->OPU2e<->ODU2<->OTU2 and 10G
base-R(GFP)<->OPU2<->ODU2<->OTU2