If the indicator blinks once every 2s (0.5 Hz), the system is running
properly. If the indicator blinks twice every second (2 Hz), the board
is starting and has not completed registration.
If the indicator is steady on, the link is Up. If this indicator blinks,
data is being transmitted or received. If the indicator is off, the link is
Down.
Table 1-1531 Service interfaces
Interface for
inputting and
outputting
100GE optical
signals
Functional Specifications
Table 1-1532 Functions and features
Provides two 100GE interfaces for line-rate transmitting and
receiving.
Occupies one half-width flexible card slot
Reliability and
availability
Technical Specifications
Table 1-1533 Interface specifications
1.11.22 100Gbps CFP2 Optical Module
NOTE
Modules with the BOM number 02311LYG are not supported.
To Next Page
Loading...
