HUAWEI TE80 Videoconferencing Endpoint
Administrator Guide
4 Display Device and Camera
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Procedure
Step 1 Choose Advanced > Settings > Video > Video Input. Set the video input parameters
described in Table 4-14.
Table 4-10 Video input parameters
Specifies the video input port name to
help you identify ports during a
conference.
Do not leave this parameter
blank.
Enter a string of 1 to 64
characters.
Specifies the type of the camera
connected. The endpoint supports
cameras of multiple manufacturers and
models.
The default value is
VPC600/VPC620.
The control commands vary
with different cameras.
Therefore, select the camera
type correctly to ensure that the
camera can be controlled
properly.
Specifies the serial port that is connected
to the camera control interface. You can
select either COM1 or COM2.
The default value for the 1
MAIN IN port is COM2 while
that for other video input ports
is None.
Select the serial port that is
being used. Otherwise, the
camera cannot be controlled.
Specifies the position of the camera after
startup.
Auto: The camera moves to its initial
position after startup.
Preset 1: The camera moves to the
preset after startup.
NOTE
Each camera preset stores the pan, tilt, and
zoom settings of the camera. For how to set
presets, see 4.6 Setting Camera Presets.
The default value is Auto.
Specifies the movement and zoom speed
for the camera at your site.
Select Slow for accurate positioning.
Select Fast for quick positioning.
Select Medium for medium paced
positioning.
The default value is Medium.
Specifies the input source format.
The default value is Auto.
Specifies whether the endpoint displays a
reflection of an input video, wherein the
right and left sides of the original are
The default value is Normal.
To Next Page
Loading...
Need help?
General
