HUAWEI TE80 Videoconferencing Endpoint
Administrator Guide
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
remote sites is adjusted
accordingly.
Adjusts the input volume of
the HDMI port at your site.
When you adjust this input
volume, the volume heard at
remote sites is adjusted
accordingly.
NOTE
If you are using the TE80, this
parameter is available only
when you select the 3 AUX IN
port as the HDMI input
source.
These parameters are selected
by default.
DP L (available only for
the TE80)
DP R (available only for
the TE80)
Adjusts the input volume of
the DP port at your site. When
you adjust this input volume,
the volume heard at remote
sites is adjusted accordingly.
NOTE
This parameter is available only
when you select the 2 PC IN
port of the TE80 as the DP input
source.
This parameter is selected by
default.
LINE IN L (available
only for the TE50)
LINE IN R (available
only for the TE50)
Adjusts the input volume of
the LINE IN port at your site.
When you adjust this input
volume, the volume heard at
remote sites is adjusted
accordingly.
These parameters are selected
by default.
Adjusts the volume for the
MIC 1, MIC 2, RCA L, RCA
R, HDMI L, HDMI R, DP L,
DP R, LINE IN L, and LINE
IN R ports.
Value range: -12 dB to +12
dB
The default value is +0dB.
Displays volume in real time.
No default value is set for this
parameter.
Microphone array
battery level
Displays the microphone
array battery level in real
time.
No default value is set for this
parameter.
Microphone array
position
Specifies the arrangement of
cascaded microphone arrays.
Set this parameter based on
the number and arrangement
of microphone arrays. For
details, see Using the Stereo
Mode.
MIC array only: Your
endpoint can receive audio
signals collected by audio
The default value is All audio
inputs.
To Next Page
Loading...
Need help?
General
