HUAWEI TE80 Videoconferencing Endpoint
Administrator Guide
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
input devices, excluding
the microphone array,
when you turn off the
microphone array.
All audio inputs: Your
endpoint cannot receive
audio signals collected by
any audio input devices
when you turn off the
microphone array.
To enable your endpoint to
receive audio signals again,
perform any of the following:
Press the button on the
microphone array to
enable this function.
Press the microphone
button on the remote
control to turn on the
microphone array only or
all audio input devices,
depending on your settings
of Switch controls.
On the endpoint web
interface, choose Device
Control > Audio Control
and select the audio input
ports you want to enable.
On the remote controlled
UI, choose Advanced >
Settings > Audio > Audio
Input and select the audio
input ports you want to
enable.
Wireless MIC power
saving mode
If you select this parameter,
when the endpoint sleeps, the
wireless microphone
VPM220W also sleeps to
save power. The VPM220W
cannot be woken up when the
endpoint is woken up. To
wake up the VPM220W,
press the mute button on it.
If you do not select this
parameter, when the endpoint
sleeps, the VPM220W also
sleeps to save power. In
addition, the VPM220W can
be woken up when the
endpoint is woken up.
The default value is Enable.
To Next Page
Loading...
Need help?
General
