Huawei PowerCube 1000 User Manual

Main Menu Second-Level
Menu
Third-Level
Menu
Fourth-Level
Menu
Default
Value
Setting
Default
Gateway
192.168.0.1 Set this parameter
according to the
address information
provided by the
network
administrator.
Step 2 Set IP addresses and port numbers for the primary and backup NetEco servers on
the LCD.
Table 12-21 Setting NetEco parameters
Main Menu Second-Level
Menu
Third-Level
Menu
Fourth-Level
Menu
Default
Value
Setting
Parameters
Settings
Comm.
Parameters
Network
Parameters
NetEco
Primary IP
192.168.0.10 Set this parameter
to the IP address of
the primary NetEco
server.
NetEco
Backup IP
192.168.0.10 Set this parameter
to the IP address of
the backup NetEco
server.
NetEco Port
Number
31220 Set this parameter
to the port number
of the NetEco.
----End
Wireless Networking
Step 1 Check whether the default wireless communications parameters on the LCD are
consistent with the communication
congurations of the carrier network that the
SIM card belongs to. If they are inconsistent, modify the parameters according to
the actual
congurations of the carrier network.
Table 12-22 Checking wireless communications parameters
Main Menu
Second-Level
Menu
Third-Level
Menu
Fourth-Level
Menu
Default
Value
Setting
Parameters
Settings
Comm.
Parameters
Mobile
Data
Carrier
Operator
Automatic Automatic, Others
PowerCube 1000 (STC, Saudi Arabia, ICC800-A1-C2,
ESC800-A1)
Installation Guide 12 Power-on and Commissioning
Issue 02 (2021-09-28) Copyright © Huawei Technologies Co., Ltd. 135

Huawei PowerCube 1000 Specifications

General

Brand	Huawei
Model	PowerCube 1000
Category	Storage
Language	English