Huawei PowerCube 1000 User Manual

Button Name Description
NOTE
● The LCD screen becomes dark if no button is pressed within 30 seconds.
● You need to log in again if no button is pressed within 1 minute.
● To increase or decrease a parameter value quickly, hold down or during
parameter setting.
● To restart the SMU, hold down
and for 10 seconds.
● To increase (or decrease) the LCD backlight, hold down and (or ) for 2
seconds.
SD Card Slot
SD card is used for storing the camera capture images, maximum support 32 G
capacity.
USB Ports
You can quickly deploy a site, import and export
conguration les, export running
logs, and upgrade software by inserting the USB ash drive that is specially used
for site deployment into the USB port.
After installing the
specic WiFi module using the USB port, you can access the
WebUI locally, which facilitates operations.
NO TICE
Using WiFi modules provided by another vendor may cause data loss or function
exception. Consequences arising from this will not be borne by Huawei.
Communications Ports
Table 3-14 Communications port description
Communications
Port
Communications
Parameter
Communications
Protocol
Usage
FE 10/100 M
autonegotiation
SNMP Connects to a
third-party
management
system.
BIN protocol Connects to a
Huawei NMS.
PowerCube 1000 (STC, Saudi Arabia, ICC800-A1-C2,
ESC800-A1)
Installation Guide 3 Component
Issue 02 (2021-09-28) Copyright © Huawei Technologies Co., Ltd. 38

Huawei PowerCube 1000 Specifications

General

Brand	Huawei
Model	PowerCube 1000
Category	Storage
Language	English